The Peconic Bay house is a RES4 Prefab that adopts a saddlebag element to accommodate vertical circulation and service items. This RES4 Prefab was conceived as an efficient solution to a tight 3 bedroom 2 bath home. Located on southern edge of the great Peconic Bay on Long Island, the primary house volume is sheathed in warm western cedar while the saddlebag mass is sheathed in a cool slate cement board. The house sits perched on a high point of the site and aims to take advantage of the bay view from it’s second floor living spaces. This 2,004 sf house includes a living area and kitchen along with a master bed and bath upstairs. Downstairs are 2 guest bedrooms, a bath as well as a media room/study and entry. Using its roof-top solar panels and its high efficiency geothermal HVAC system, this house is its own power plant, contributing power back to the grid daily.
Site: This compact prefabricated home features many sustainable assets ranging from site selection to the use of renewable energy. A sustainable site evaluation avoided using an environmentally sensitive site by selecting an edge development lot within 1/2 mile of existing water & sewer along with basic community resources and public transportation.
Sustainable Landscape: A basic landscaping design limits turf, incorporates drought tolerant plants and avoids invasive plant species. The permeable groundcover and carpark limit water run off while permanent erosion controls, such as protective retaining walls, have been designed and installed.
Geothermal HVAC: The HVAC system is an energy star approved forced-air geothermal unit. The open loop geothermal well eliminates exterior condenser units, minimizing ozone depletion and global warming contributions.
Photovoltaic System: A renewable energy generation system is incorporated into the house. A 9,000KwH roof-top solar array has nearly eliminated electric bills. Prefabricated Construction: This modular house also incorporates advanced framing techniques and minimizes framing waste. The homes manufacturer is an approved planet-friendly home factory and incorporates an extensive waste management and recycling program in their plant operations.
Energy Conservation: The project utilizes efficient windows and low-E glazing that exceed energy star rating for Solar Heat Gain Coefficient (SHGC) and U-Factor. In addition to incorporating energy star appliances.
o Bedrooms: 3
o Baths: 2
o Features: Media Room/Study, Carport, Screen Porch, Outdoor Shower, Roof Deck
o Environmentally Friendly Features: 9 kW Solar Photovoltaic System, Geothermal Heating/Cooling System
o Exterior: Cedar Siding, Cement Board Panels, Ipe wood Decking
o Interior: Maple Cabinets, Bamboo Flooring, Walnut Millwork, Caesarstone Countertops, Slate Bathroom Floors, Aluminum Clad Wood Windows with Low E, Insulated Glass
Completion Date: 2008
Size: 2,364 sf
Typology Series: Single Bar
Modules: 4 Boxes, Panelized Carport & Saddle Bag
Project Architect: Paul Coughlin
Manufacturer: Simplex Industries
Project Coordinator: Jason Drouse
Engineer: Lynne Walshaw, P.E., Greg Sloditskie
Contractor.: Teresi Construction