Window treatments will help prevent direct sunlight on your windows, preserve your furniture, accentuate your room, and ensure your privacy. However, decorative curtains are not that simple to hang, especially when you live on your own.
Fortunately, there are methods to hang curtains in a few minutes rather than hours. This article will assist you in learning how to hang curtains from the ceiling without drilling. Let’s explore six techniques to hang curtains not only from the ceiling but other locations as well.
- Curtain materials and tools
- Hanging curtains from the ceiling without drilling holes
- Additional techniques of installing curtains without a drill
Table of Contents
- Curtain Materials And Tools
- Hanging Curtains From The Ceiling Without Drilling Holes
- Additional Techniques of Installing Curtains without a Drill
Curtain Materials And Tools
It’s amazing to bring a luxury hotel with a lovely canopy into your bedroom that will make you feel like you are on a holiday every day. You can create a beautiful, royal canopy bed with only a few basic items.
To do that, you must prepare the equipment before you begin the process of how to hang drapes from the ceiling without drilling. Some of them are listed below.
- Curtain rod
- Adhesive hooks
- Ceiling brackets
- Tape measure
- Surface cleaner
- Paper towel or cloth
- Putty knife
- Screwdriver (Optional)
- Screws (Optional)
Hanging Curtains From The Ceiling Without Drilling Holes
Rod pocket curtains stitched on top are excellent for the perfect canopy design. You may also use curtain grommets or even regular textiles, which connect the clips to the top edge. In addition, you must know how to prepare and install properly to prevent problems before you hang curtains from the ceiling without drilling. So, how can you create a royal bedroom? Let’s look at the following guidelines.
Step 1: Curtain length measurement
Two measurements are required to decide the length of the curtains and the curtain rods. The first one is your room height, which means that you have to measure from the floor to the ceiling and add a couple of extra centimeters or inches to know how long your curtains would be. Take note that the curtain material just reaches the floor or stops at an inch or centimeter higher.
The second is your bed length, which will determine how long your curtain rods will be. Same as the room height, add about two to three more centimeters or inches to give some room for the curtains to drape your bed.
Step 2: Mark your ceiling
Use a pencil to outline the four corners on the ceiling where you’ve planned to install the hooks. Then, mark the center point from both sides of the bed with a measuring tape and pencil. When standing on the ladder, be careful. You may need a hand to assist in this step. This second step is required to identify the location of the curtain and ensure that the position matches your bed.
Step 3: Wipe the ceiling surface
If the ceiling is dusty, the adhesive hook will not stick for a long time. Thus, to thoroughly clean any dust surrounding your pencil traces, use either a wet cloth or paper towel and a full-purpose cleanser. Then, give those areas some time to dry. Ensure that the surface is free from dirt to make the installation more manageable.
If you have a stipple ceiling, you need to sand off the texture surrounding the place where you will place your hook with a putty knife. Do it gently and examine your ceiling condition before scraping all the pieces away.
Step 4: Install the hooks or ceiling brackets
Two options to have a lovely seamless curtain hanging from the ceiling are adhesive hooks or ceiling brackets for curtains.
Pull the adhesive layer off the hook and place it on top of the previous marks. Press the hook to the ceiling softly and let it fit tightly. Make sure all the hooks face the middle of the bed.
Buy hooks with high-quality glue to securely hang a curtain rod from the ceiling. Six of them will be ideal to hold the curtain material. Besides choosing proper ceiling hooks for curtain rods, pay special attention to the size of the rod. Remember that it must go into the hook, meaning that you should use a curtain rod less than an inch.
If it’s alright to make a little hole, a screwdriver and a handful of screws are needed to mount the brackets. For heavy curtains and rods, attach anchors to keep the brackets in place. Then, put in the curtain rod brackets. Some small holes will avoid the rods pulling out of the ceiling.
Step 5: Set up the rods
You may start to install the curtain rods once you have placed the hooks in the ceiling. Firstly, you should set every rod into the hooks on the sides of your bed and then go back to see if they are in the right position over the bed. You can alter the curtain hooks or rods in this step if they are not balanced.
Step 6: Hang curtains
After checking their position, you can put the curtain on. Slide the drapes on the curtain rods and set them back into the hooks or the mounting brackets. For the curtain rod brackets, they might have a screw to hold the rod in place. So after the rod is inserted, you will want to tighten them.
To give it a completed and attractive look, apply the decorative finials as well. The final step is to adjust the layout you desire after they are fully installed. For example, you can knot it or leave it as a frame around the corner of the bed.
Additional Techniques of Installing Curtains without a Drill
Besides hanging curtains from the ceiling, you may be seeking to insert curtains without putting holes in your windows when you rent an apartment or have newly painted or textured walls. With these ideas, your window treatment blocks direct sunshine and adds a unique style to your space.
Even though the adhesive command hooks are mostly used to hang art and clothing, the company also manufactures hooks for drapes. This type of command hook is easy to put and detach when you don’t want to drill holes in your wall or window. No sticky substance is left on the wall after you remove the hooks. Follow the simple installation process with command hooks below:
- Prepare two to three hooks matching your rod. Two can be enough, but a third command hook supports the center if your window width is more than thirty inches or 75cm.
- Mark your surface, which will attach to each hook with a pencil.
- Clean the wall thoroughly with alcohol, especially the space above your window frame.
- Remove the adhesive on one side of the command strips.
- Take off the other side and firmly press the wall for 10 to 30 seconds. Then, do the other hook.
- Finally, hang the curtain rods and curtains.
Tension rods can be adjusted from one side to the other of the window frame. Drilling holes in the walls is not necessary when you have a tension rod curtain. It’s about the tension you’re putting on it. Without difficult measurements, you can place them on your windows in a few minutes. If you have low windows, your best choice is a tension rod.
- Choose the tension rods that suit the inside of your window.
- Push the rod through the curtain.
- Try to screw or loosen the tension rod until it fits tightly into the window frame.
This approach might assist you in hanging curtains fast without harming or measuring your walls. Furthermore, they can carry about 10kg, which means that you can hang thick and heavy blackout curtains.
- Place the curtain rod brackets at the edges of the frame.
- Tap them into place using a hammer.
- Push the curtain rod across the sheets.
- Hang your curtains up.
With just a little knowledge and the proper methods to hang curtains from the ceiling without a drill, you will be able to have a stunning bed style instead of buying a completely new one. Spend your spare time to improve your property’s beauty with various models, materials, and colors of the curtains.
You perhaps have learned several techniques on how to hang curtains from the ceiling without drilling through this article. Was this post informative? If yes, leave your opinion in the comment area and share them with your friends and family.